13X Type Molecular Sieve Gas Drying Adsorb Desiccant for Removal

• Shape: Sphere, Pellet
• Drying Method: Static Drying
• Kind: Molecular Sieve Desiccant
• Sorbent: Molecular Sieves
• Desiccant: Chemical Desiccant
• Keyword: Zeolite Molecular Sieve
• Model NO.: MS05
• Transport Package: Drum, Bag, Carton
• Specification: 1.7-2.5mm, 3.0-5.0mm, 1.6mm, 3.2mm
• Trademark: JXKELLEY
• Origin: Pingxiang, China

Product Description

Product Description

 

Product Description

Products Introduction of 13X Type Molecular Sieve

Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 9 Angstrom (0.9 nm) and exclude those larger.

It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.

Product Parameters

Product Parameters

Technical Specification of 13X Type Molecular Sieve

Model	13X
Color	Light gray
Nominal pore diameter	10 angstroms
Shape	Sphere			Pellet
Diameter (mm)	1.7-2.5	3.0-5.0		1.6		3.2
Size ratio up to grade (%)	≥98	≥98		≥96		≥96
Bulk density (g/ml)	≥0.7	≥0.68		≥0.65		≥0.65
Wear ratio (%)	≤0.20	≤0.20		≤0.20		≤0.20
Crushing strength (N)	≥35/piece	≥85/piece		≥30/piece		≥45/piece
Static H2O adsorption (%)	≥25	≥25		≥25		≥25
Static CO2 adsorption (%)	≥17	≥17		≥17		≥17
Water content (%)	≤1.0	≤1.0		≤1.0		≤1.0
Typical chemical formula	Na2O. Al2O3. (2.8 ± 0.2) SiO2. (6~7)H2O SiO2: Al2O3≈2.6-3.0
Typical application	a) Removal of CO2 and moisture from air(air pre-purification) and other gases. b) Separation of enriched oxygen from air. c) Removal of n-chained compositions from aromatics. d) Removal of R-SH and H2S from hydrocarbon liquid streams (LPG, butane etc.) e) Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams). f) Production ofbulk oxygenin PSA units.
Package	Carton box; Carton drum; Steel drum
MOQ	1 Metric Ton
Payment terms	T/T; L/C; PayPal; West Union
Warranty	a) By National Standard HG-T_2690-1995
	b) Offer lifetime consultation on problems occurred
Container	20GP		40GP		Sample order
Quantity	12MT		24MT		< 5kg
Delivery time	3 days		5 days		Stock available

Application of 13X Type Molecular Sieve

Removal of CO2 and moisture from air (air pre-purification) and other gases.

Separation of enriched oxygen from air.

Removal of mercaptans and hydrogen sulphide from natural gas.

Removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams (LPG, butane, propane etc.)

Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams).

Production of bulk oxygen in PSA units.

Production of medical oxygen in small scale oxygen concentrators.

Regeneration of 13X Type Molecular Sieve

Molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.

To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required.

A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppm.

The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Attention

To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Packaging & Shipping

Certifications