Pellet 1.6mm 3.2mm 3A Type Molecular Sieve for Removal Water

• Customization: Available
• Shape: Sphere, Pellet
• Drying Method: Static Drying
• Model NO.: MS01
• Sorbent: Molecular Sieves
• Desiccant: Chemical Desiccant
• Keyword: Molecular Sieve
• Transport Package: Drum, Bag, Carton
• Specification: 1.7-2.5 3.0-5.0 1.6 3.2mm
• Trademark: JXKELLEY
• Origin: Pingxiang, China

Product Description

 

Product Description

 

 

Product Description

Products Introduction of 3A Molecular Sieve

Molecular Sieve type 3A is an alkali metal alumino-silicate; it is the potassium form of the type A crystal structure. Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers; and this maximises lifetime when dehydrating such molecules.

Product Parameters

Product Parameters

Technical Specification of 3A Molecular Sieve

Model	3A
Color	Light gray
Nominal pore diameter	3 angstroms
Shape	Sphere			Pellet
Diameter (mm)	1.7-2.5	3.0-5.0		1.6		3.2
Size ratio up to grade (%)	≥98	≥98		≥96		≥96
Bulk density (g/ml)	≥0.72	≥0.70		≥0.66		≥0.66
Wear ratio (%)	≤0.20	≤0.20		≤0.2		≤0.2
Crushing strength (N)	≥55/piece	≥85/piece		≥30/piece		≥40/piece
Static H2O adsorption (%)	≥21	≥21		≥21		≥21
Ethylene adsorption (‰)	≤3.0	≤3.0		≤3.0		≤3.0
Water content (%)	≤1.5	≤1.5		≤1.5		≤1.5
Typical chemical formula	0.4K2O . 0.6Na2O . Al2O3. 2SiO2. 4.5 H2O SiO2: Al2O3≈2
Typical application	a) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadien) b) Cracked Gas Drying c) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. d) Drying of highly polar compounds, such as methanol and ethanol e) Drying of liquid alcohol f) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled. g) Drying of CNG.
Package	Carton box; Carton drum; Steel drum
MOQ	1 Metric Ton
Payment terms	T/T; L/C; PayPal; West Union
Warranty	a) By National Standard GBT 10504-2008
	b) Offer lifetime consultation on problems occurred
Container	20GP		40GP		Sample order
Quantity	12MT		24MT		< 5kg
Delivery time	3 days		5 days		Stock available

Regeneration of 3A Molecular Sieve

Molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.

To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Attention

To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Packaging & Shipping

Certifications