| Customization: | Available |
|---|---|
| Application: | Automotive Industry, Electronics, Electronics Industry, Medical Industry, Packaging Industry |
| Color: | White |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Products Introduction of Plastic Cascade Mini Ring
Plastic Cascade Mini Ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF).
Plastic Cascade Mini Ring:
It was developed by British Company MTL Ltd, which also called CMR. It has not only change traditonal equal length and diameter, but also cone-shaped flanging at one edge. This special structure has shorten distance which gas passing through wall's out surface, but also reduced the resistance when air passing through bed layer and increased voidage.
Product Parameters
Technical Specification of Plastic Cascade Mini Ring
|
Product name |
Plastic cascade mini ring |
|||||
|
Material |
PP, PE, PVC, CPVC, PVDF, etc |
|||||
|
Life span |
>3 years |
|||||
|
Size |
Surface area m2/m3 |
Void volume % |
Packing number pieces/m3 |
Packing density Kg/m3 |
Dry packing factorm-1 |
|
|
Inch |
mm |
|||||
|
1/2'' |
16*8.9*1 |
370 |
85 |
299136 |
135.6 |
602.6 |
|
1" |
25*12.5*1.2 |
228 |
90 |
81500 |
65 |
312.8 |
|
1-1/2" |
38*19*1.2 |
132.5 |
91 |
27200 |
54 |
175.8 |
|
2" |
50*25*1.5 |
114.2 |
92.7 |
10740 |
43 |
143.1 |
|
3" |
76*37*2.6 |
90 |
92.9 |
3420 |
44 |
112.3 |
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
|||||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. |
|||||
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.
|
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
|
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Our Factory assure all tower packing made from 100% Virgin Material.
Shipment for Products
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & Shipping|
Package type |
Container load capacity |
||
|
20 GP |
40 GP |
40 HQ |
|
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
|
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
|
Paper box |
20 m3 |
40 m3 |
40 m3 |
|
Delivery time |
Within 7 working days |
10 working days |
12 working days |
){kind=link}