| Material: | Plastic |
|---|---|
| Structure Feature: | Saddle Filler |
| Type: | Random Packing |
| Usage: | Chemical Engineering, Chemical Industry Product, Sewage Treatment |
| Effect: | High Mass Transfer Efficiency |
| Source: | Plastic |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Products Introduction of Plastic Intalox Saddle
The Plastic Intalox Saddle is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280ºC. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.
Plastic Intalox Saddle is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulat.
Product Parameters
Technical Specification of Plastic Intalox Saddle
|
Product name |
Plastic intalox saddle |
||||||
|
Material |
PP, PE, PVC, CPVC, PVDF, etc. |
||||||
|
Life span |
>3 years |
||||||
|
Size inch/mm |
Surface area m2/m3 |
Void volume % |
Packing number pieces/m3 |
Packing density Kg/m3 |
Dry packing factor m-1 |
||
|
1" |
25 × 12.5 × 1.2 |
288 |
85 |
97680 |
102 |
473 |
|
|
1-1/2" |
38 × 19 × 1.2 |
265 |
95 |
25200 |
63 |
405 |
|
|
2" |
50 × 25 × 1.5 |
250 |
96 |
9400 |
75 |
323 |
|
|
3" |
76 × 38 × 2 |
200 |
97 |
3700 |
60 |
289 |
|
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
||||||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. |
||||||
|
Performace/ material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density(g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
|
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Our Factory assure all tower packing made from 100% Virgin Material.
Shipment for Products
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & Shipping
|
Package type |
Container load capacity |
||
|
20 GP |
40 GP |
40 HQ |
|
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
|
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
|
Paper box |
20 m3 |
40 m3 |
40 m3 |
|
Delivery time |
Within 7 working days |
10 working days |
12 working days |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}