Plastic Tri-Pak Polyhedral Hollow Ball Plastic Random Packing

• Material: Plastic
• Structure Feature: Ring Form Filler
• Type: Random Packing
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment
• Effect: High Mass Transfer Efficiency
• Source: PP, PE, PVC, CPVC, Rpp, PVDF and ETFE etc
• Model NO.: PRP18
• Keyword: Plastic Tri Pack
• Transport Package: Bag, Super Bag
• Specification: 25mm/38mm/50mm/95mm
• Trademark: JXKELLEY
• Origin: Pingxiang, China

Product Description

Product Description

Product Description

Products Introduction of Plastic Tri-Pak

Kelley Tri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.

Product Parameters

Product Parameters

Technical Specification of Plastic Tri-Pak

Product name			Plastic tri-pak
Material			PP, PE, PVC, CPVC, PPS, PVDF
Life span			>3 years
Size mm	Surface area m2/m3	Void volume %	Packing number pieces/ m3	Packing density Kg/m3	Dry packing factor m-1
25	85	90	81200	81	28
32	70	92	25000	70	25
50	48	93	11500	62	16
95	38	95	1800	45	12
Feature	1. Tri-Packs are hollow, spherical packings made of injection molded plastic, available in four diameters: 25, 32, 50, 95mm. 2. Symmetrical geometry made from a unique network of ribs, struts, and drip rods. 3. High active surface areas. 4. Extremely low pressure drops. 5. Extremely high operating capacities.
Advantage	1. High and mass heat transfer rates. 2. Excellent gas and liquid dispersion characteristics. 3. Resist nesting, making removal easily. 4. Available in a wide variety of plastics raw material. 5. Predictable performance.
Application	1. Stripping, de-gasifier and scrubber. 2. Liquid extraction 3. Gas & liquid separation 4. Water treatment

Physical & Chemical Properties of Plastic Tri-Pak

Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF). The temperature in media ranges from 60 Degree C to 280 Degree C.

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density(g/cm3) (after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation temp.(ºC)	90	>100	>120	>60	>90	>150
Chemical corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression strength(Mpa)	>6.0	>6.0	>6.0	>6.0	>6.0	>6.0

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Packaging & Shipping

Packaging & Shipping

 

Shipment for Products

1. OCEAN SHIPPING for large volume.

2. AIR or EXPRESS TRANSPORT for sample request.

Packaging & Shipping

Package type	Container load capacity
	20 GP	40 GP	40 HQ
Ton bag	20-24 m3	40 m3	48 m3
Plastic bag	25 m3	54 m3	65 m3
Paper box	20 m3	40 m3	40 m3
Delivery time	Within 7 working days	10 working days	12 working days

Certifications