| Customization: | Available |
|---|---|
| Application: | Automotive Industry, Electronics, Electronics Industry, Medical Industry, Packaging Industry |
| Color: | White |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Products Introduction of Plastic Rosette Ring
Plastic Teller Rosette Ring is the first A.J.Teller by the United States in 1954 out of research and development, and therefore also often referred to as the garland wreath Taylor (Teller Rosette). This filler is composed of many ring formed around the knot, because the department can fill the gap for a higher liquid holdup, the liquid column can stay longer, thus increasing the two-phase gas-liquid contact time, improve the packing efficiency of mass transfer. Polypropylene packing with porosity, and pressure drop and low height of mass transfer unit, the pan-point high, vapor-liquid contact with the full, the proportion of small, high efficiency and mass are used for gas scrubbing, purifying tower.
Product Parameters
Technical Specification of Plastic Rosette Ring
|
Product name |
Plastic Rosette Ring |
||||
|
Material |
PP, PE, PVC, CPVC, RPP, PVDF and ETFE etc |
||||
|
Life span |
>3 years |
||||
|
Size mm |
Surface area m2/m3 |
Void volume % |
Packing number pieces/m3 |
Packing density Kg/m3 |
Dry packing factorm-1 |
|
25*9*(1.5*2) (5 ring) |
269 |
82 |
170000 |
85 |
488 |
|
47*19*(3*3) (9 ring) |
185 |
88 |
32500 |
58 |
271 |
|
51*19*(3*3) (9 ring) |
180 |
89 |
25000 |
57 |
255 |
|
59*19*(3*3) (12 ring) |
127 |
89 |
17500 |
48 |
213 |
|
73*27.5*(3*4) (12 ring) |
94 |
90 |
8000 |
50 |
180 |
|
95*37*(3*6) (18 ring) |
98 |
92 |
3900 |
52 |
129 |
|
145*37(3*6) (20 ring) |
65 |
95 |
1100 |
46 |
76 |
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
||||
|
Application |
Gas absorption, Acidic gases deabsorption system, Washing, Fertilizer production. These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. |
||||
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF). The temperature in media ranges from 60 Degree C to 280 Degree C.
|
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density(g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
|
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Our Factory assure all tower packing made from 100% Virgin Material.
Packaging & Shipping
Shipment for Products
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & Shipping|
Package type |
Container load capacity |
||
|
20 GP |
40 GP |
40 HQ |
|
|
Ton bag |
20-24 m3 |
40 m3 |
48 m3 |
|
Plastic bag |
25 m3 |
54 m3 |
65 m3 |
|
Paper box |
20 m3 |
40 m3 |
40 m3 |
|
Delivery time |
Within 7 working days |
10 working days |
12 working days |
){kind=link}